Tinted 7 Color 3-3/4" 10,000 RPM On-Dash Tachometer Gauge

GlowShift’s Tinted 7 Color Series 3-3/4" On-Dash Tachometer Gauge offers multiple ultra-high performance features, making it perfect for anyone with a 1 through 10 cylinder gas powered vehicle. This tachometer reads from 0 to 10,000 RPM with incredible accuracy and ensures you are shifting at the appropriate time, also protecting against unnecessary transmission wear.

GlowShift’s Tinted 7 Color Gauge Series comes standard with a cutting-edge design that includes a black gauge face, analog display, illuminated red needle and low profile magnified tinted lens. You can also choose between 7 different color options for the LED display. Install to the dashboard, A-pillar, or another location inside your vehicle. You’ll enhance the interior of your car or truck by adding a gauge that delivers readings with pinpoint accuracy at the same time.

Features The illuminated red needle that this gauge is equipped with sweeps 270° and is powered by stepper motor technology, giving you an effective combination of incredibly precise gauge readings and extremely smooth needle movement. GlowShift’s 7 Color through dial lighting system allows you to select and change the color of your gauge lighting display by simply pressing the button located on the front of the gauge.

7 Color Options Easily cycle through the 7 Solid Color Settings and 2 Color Cycle Modes. The solid color modes featured are Blue, Green, Red, Teal, Yellow, Purple and White. Adjust the color of the gauge to match your factory dash lights, or create a custom look inside of your car or truck. With the Color Memory feature, you won’t have to reset the color of the gauge every time you turn on your vehicle.

Backlighting This gauge features LED backlighting which results in an ultra-bright display that delivers clear and vivid readouts. On or off, the gauge will look amazing courtesy of the black gauge dial and magnified tinted lens which are at the heart of this Gauge Series. By connecting the orange wire from the power harness to the factory headlight switch, you’ll be able to dim the gauge 30% when the headlights are on. This feature will help you to reduce brightness and glare while viewing readings at night.

What's Included

3-3/4” (95mm) Tachometer Gauge 2’ Power & 6’ Signal Wire 3-3/4” On-Dash Mounting Bracket Adhesive Tape Mounting Bracket Hardware Installation Instructions

Shift Light To set the shift point, press and hold the “Adjustment” knob on the gauge face for 5 seconds until the needle displays the current set shift point. Twist “Adjustment” knob to increase or decrease the RPM settings.

On-Dash Mount The On-Dash Mounting Bracket comes with hardware and can be installed to your car or truck’s dashboard, or any flat surface in your vehicle. The Tachometer easily fits and will remain fully secured as you take readings.

Wiring The 2’ Power Harness utilizes Plug and Play Connectivity to easily snap into the modular connector on the back of the gauge. Wires are included for Power, Ground, and a Dimming feature. The 6’ Signal Wire attaches directly to the Tachometer Signal.

GlowShift 3-3/4” Tachometer That Works With Gasoline Engines

GlowShift’s jumbo tachometers are a great addition to any vehicle with a gas engine. A tach gauge’s measurements show the rate of rotation of an engine’s crankshaft while also usually indicating a safe range of rotation speeds. Among the many benefits is helping a driver choose the best throttle and gear settings depending on the type of road conditions. Some engines produce most of their torque at lower RPMs, and experience lower torque as RPMs increase. Other motors must spin very quickly to produce the most power, which can often be seen in smaller gasoline engines. By knowing at which RPM rate your engine produces the most power using a tachometer gauge, you’ll be able to get better performance out of your vehicle.

Note For Multiple Coil Systems

Our Tachometers are only designed for a gasoline, single coil application. For multiple coil applications, the use of a multiple coil or aftermarket ignition system adapter is required. Vehicles equipped with High Energy Ignition Systems (HEI) will require GlowShift’s HEI Signal Filter.

GlowShift Guarantee

GlowShift is your source for cutting-edge aftermarket automotive products specially designed for cars and trucks. Shop with confidence knowing that all purchases are backed by a one year limited warranty and free lifetime tech support. You will also have access to an unrivaled customer support experience in the event you have any questions about our gauges, pods and accessories.