Dodge Ram Cummins

5.9 Cummins Boost Gauges are designed for any 98-02 Dodge Ram running higher boost pressure and give you the ability to easily monitor boost levels from 0 to 60 PSI. This Cummins boost gauge ensures your turbo is performing at optimum levels and that it does not overboost causing critical engine damage. A turbo boost gauge is a great fit for monitoring when you’re getting more boost out of your stock or upgraded turbo. This gauge is ideal for newer or modified 2nd Generation 1998-2002 Dodge Rams running boost levels in the approximate area of 45 PSI to 55 PSI.

GlowShift’s Boost Bolt Adapter is designed to thread directly into your Dodge Ram Cummins 2500 & 3500 5.9L Diesel’s intake manifold, allowing you to easily install the compression fitting or sensor that is included with your GlowShift boost gauge. Installation is easy with no drilling or tapping necessary.

The 1500° Fahrenheit Pyrometer Exhaust Gas Temperature Gauge is essential for any 1998-2002 Dodge Ram 24v 5.9L Cummins 2500 & 3500 that is driving long distances or pulling heavy loads, ensuring your exhaust temperature is not running too hot which could result in engine failure. With unique features such as simple Plug and Play connectors for the power and sensor harnesses, this Cummins EGT Gauge will take readings from 0 to 1500° Fahrenheit with pinpoint precision. A Pyrometer EGT Gauge Cummins is considered one of the most important Ram truck turbo diesel gauges.

A Transmission Temperature Gauge is essential for any Second Gen 5.9 Cummins with an automatic transmission. This Cummins trans temp gauge allows you to closely monitor the temperature of your transmission, ensuring it does not overheat causing significant damage. Once you connect the included electronic transmission temperature sensor with 1/8-27 NPT male threads, the gauge will take readings from 80° to 260° Fahrenheit with unrivaled accuracy. One of the major factors in reducing the life of a 98-02 Dodge Ram’s transmission is overheating, and one of the main reasons a truck transmission overheats is due to the strain of towing heavy cargo and running long distances.

GlowShift’s 1/8-27 NPT Transmission Test Port Extender is required when installing any of our transmission temperature gauges to 5.9 Cummins 47RE and 48RE transmissions. If this extender is not installed, your Ram’s internal transmission parts will break the sensor which could result in major damage. This 1/8-27 NPT adapter will extend the transmission test port, allowing you to easily install your transmission temperature gauge’s temperature sensor.

5.9 Cummins Fuel Pressure Gauges monitor lower fuel pressure levels on any 1998-2002 Ram truck, displaying readings from 0 to 30 PSI. This diesel fuel pressure gauge kit for 5.9 Cummins makes sure your Dodge's fuel system is running at its peak, and ensures the pressure is not too low which could result in damage to your fuel pump and injectors. Each 5.9 Cummins fuel pressure gauge kit comes with a 1/8-27 NPT electronic fuel pressure sensor which enables you to take extremely accurate readings. Please also note that a Snubber Valve is required when installing a GlowShift 30 PSI Fuel Pressure Gauge into a 98-02 Dodge Ram 24 Valve Cummins.

This adapter is available for the 24v 5.9L Cummins, allowing you to easily install your fuel pressure sensor directly to the fuel filter housing with the protection of the snubber valve. Benefits include less fittings and less chances of leaks, along with better clearance of the frame rails.

This GlowShift Banjo Bolt Adapter was specifically designed for the 98-02 Dodge Ram with a 24 valve Cummins motor. The adapter will replace your stock banjo bolt, allowing you to easily install a snubber valve and fuel pressure sending unit directly to the fuel filter housing. The 24V Cummins Banjo Bolt will fit on either the inlet side of the injection pump or the fuel filter housing. The thread size is M12 x 1.5 and it comes with (2) 0.46” diameter washers.