2-5/8" Black & White Racing Mechanical Water Temperature Gauge

GlowShift 2-5/8” (65mm) Black & White Racing Series Mechanical Water Temperature Gauges are mechanical gauges that monitor your car or truck’s engine coolant temperature with pinpoint precision. View readings from 100° to 280° Fahrenheit to prevent overheating which could lead to critical engine damage. This mechanical water temp gauge is optimal for any racing application putting increased stress on the engine. A Temperature Probe with 6’ of Steel Cabling and a 2’ Power Harness are both attached to the back of the gauge. The thread of the adapter on the gauge is 5/8-18 UNF with 1/2 NPT, 3/8 NPT and M16 x 1.5 adapter sizes also included.

GlowShift 2-5/8” (65mm) Black & White Racing Series Gauges have a black gauge dial, flat clear lens and illuminated red needle with full 270 degree movement. Each analog racing gauge features ultra-bright white LED illumination for readings utilizing a through dial lighting system. This drag racing gauge creates a combination of accurate readouts and extremely smooth needle movement. Activate Nighttime Dimming Mode to reduce the brightness of the gauge by 30% for optimal viewing of readings after sundown.

Black & White Series Drag Racing Gauges are designed specifically for race cars and trucks. The larger 2-5/8” (65mm) gauge face makes it easier to view readings from different angles when you’re driving. Accurately monitor readouts anytime your engine is being put under added stress and enhance the look of your racing application at the same time.

2-5/8" Gauge Dial Larger Gauge Dial Easily View Readings Optimal for Racing Modify Your Vehicle

No-Nonsense Design Analog Racing Gauges Black Gauge Dial & White Readings Through Dial Lighting System Full 270 Degree Needle Movement

Dimming Modes Better Visibility at Night Dims the Gauge 30% Continue to Easily View Readings Activate with a Simple Connection

If you’re building a custom dashboard, or looking to overhaul the interior of your car or truck, installing these drag racing gauges will add a new dimension to your driving experience. Use the included 2-5/8” mounting bracket which installs to virtually any flat surface and take quick-glance readouts.

With 6’ of steel cabling you’ll have plenty of flexibility installing the water temperature probe. Multiple adapter sizes are also included to fit your specific application. Connect to your car or truck’s battery or another 12 volt source and start taking accurate readings.

Gauge Specs 2-5/8” (65mm) Racing Gauge with Black Gauge Dial, White LED Through Dial Lighting, Flat Clear Lens, Chrome Trim Ring and Illuminated Red Needle.

Temp Probe Temperature Probe Featuring 6’ of Steel Cabling and a 5/8-18 UNF Adapter Attached to the Back of the Gauge with 1/2 NPT, 3/8 NPT and M16 x 1.5 Adapters Also Included.

Wiring 2’ Power Harness Connected to the Back of the Mechanical Coolant Temp Gauge with a Black Wire that Connects to Your Ground Source.

What's Included