GMC Duramax

The 6.6 Duramax 60 PSI Boost Gauge gives you the ability to easily monitor your 00-06 GMC truck’s boost levels from 0 to 60 PSI and is designed for any Sierra 2500HD or 3500HD running high boost pressure. This GMC Sierra boost gauge ensures your turbo is performing at optimum levels and that it does not overboost causing critical engine damage. A Duramax boost gauge is a great fit for monitoring boost levels in your LB7, LLY or LBZ when you’re getting more boost out of your stock or upgraded turbo. This gauge is ideal for newer or modified GMC’s running boost levels in the area of about 22 to 37 PSI.

GlowShift Boost T-Fitting Adapters allow you to avoid drilling and tapping your intake manifold by cutting the MAP line and inserting the T-fitting in the two cut ends. The two included hose clamps allow you to tighten the two ends of a MAP line to the T-fitting for an airtight seal which results in extremely accurate boost pressure readings. The T-fitting features a 1/8-27 NPT Female thread for a sensor or compression fittings.

A GMC Sierra Trans Temp Gauge is essential for any LB7, LLY or LBZ and goes hand-in-hand with monitoring 00-06 Sierra Allison 1000 transmissions, especially when these diesel trucks are towing heavy loads. This gauge allows you to closely monitor the temperature of your transmission, ensuring that it does not overheat causing significant damage. Once you connect the included electronic transmission temperature sensor with 1/8-27 NPT male threads, this trans temp gauge will effectively take readings from 80° to 260° Fahrenheit.

The GM Allison 1000 Transmission Line T-Fitting Adapter allows the installation of a 1/8-27 NPT transmission temperature sensor directly onto the 5/8” transmission cooler feed line for extremely accurate readings. This GM Duramax Transmission Cooler Line T-Fitting Adapter includes (1) T-fitting housing with 1/8-27 NPT sensor port, (2) compression nuts and (4) cutting rings that ensure a tight, leak free seal. This T-fitting adapter is manufactured from high quality carbon steel with a tough nickel zinc coating that prevents rust over long term use.

The 1500° F Pyrometer EGT Gauge is essential for anyone driving a 2000-2006 Sierra 2500HD/3500HD who is pushing for maximum output of their 6.6L Duramax diesel engine. This GMC Sierra EGT gauge will ensure that your exhaust gas temperature is not running too hot which could result in turbo failure. With features like Plug and Play connectors for the power and sensor harnesses, this Duramax EGT gauge can be activated in no time and will take readings from 0 to 1500° Fahrenheit with pinpoint accuracy.

The 30 PSI GMC Sierra Fuel Pressure Gauge for the 6.6 Duramax displays readings from 0 to 30 PSI, and is the right gauge for any 00-06 Sierra since they run on lower fuel pressure. This Duramax fuel pressure gauge ensures your fuel pressure is running at peak levels, and that it is not too low which could result in damage to your fuel pump or injectors, resulting in a loss of overall horsepower. The first step for installation is making sure that your Duramax has an aftermarket lift pump. Duramax engines do not have this lift pump to supply fuel to the engine and it is essential that it is added.

Note: When installing this gauge to a GM Duramax engine, an aftermarket lift pump is required for this gauge to function properly.