Ford Super Duty Power Stroke

This Turbo Boost Gauge gives you the ability to easily monitor your 17-20 Super Duty’s boost levels from 0 to 60 PSI and is designed for any 6.7L Power Stroke running high boost pressure. Parts for installation of these Super Duty gauges are included and will vary depending on the Gauge Series. You will receive a Boost Sensor, 9’ of Boost Hose, 1/8-27 Compression Fittings and more. This gauge is ideal for newer or modified Super Duty’s running boost levels in the approximate area of 45 PSI to 55 PSI.

The 1500° Fahrenheit Pyrometer EGT Gauge is for anyone driving a 2017-2020 Ford Super Duty F150, F250 or F350 with a 6.7L Power Stroke who is pushing for maximum output of their diesel engine. This gauge will ensure that your exhaust gas temperature is not running too hot which could result in engine failure. Each pyrometer comes with everything required for installation, including a 1/8-27 NPT Type K Thermocouple EGT Probe with 3’ of steel braided cable; a 6’ stainless steel braided sensor harness, mounting hardware and more.

A Powerstroke Transmission Temperature Gauge is essential for any 2017-2020 Ford Super Duty 6.7 Powerstroke and goes hand-in-hand with monitoring F150, F250 & F350 TorqShift-G 6-Speed and TorqShift 10-Speed Automatic Transmissions. Included you’ll receive an Electronic Transmission Temperature Sensor with 1/8-27 NPT Male Threads, a 2’ Sensor & Power Harness and other installation parts. One of the major factors in reducing the lifespan of a Super Duty’s transmission is overheating. Keep an eye on changing temperatures with incredibly accurate readings and avoid any unusual spikes.

GlowShift Alumiduty Transmission Test Port Adapters allow you to easily install a 1/8-27 NPT Trans Temp Sensor into your 2011-2020 Ford Super Duty with Torqshift Transmissions. Simply remove the factory plug on the driver side and replace it with the adapter. This Alumiduty test port adapter is manufactured from premium quality steel with a yellow zinc coating, includes a copper crush washer, and is built to last the lifetime of your truck.

This 100 PSI Fuel Pressure Gauge for the 2017-2020 Ford Super Duty F-150, F-250 & F-350 with a 6.7L Power Stroke displays readings from 0 to 100 PSI with pinpoint precision. These Super Duty gauges come with a 1/8-27 NPT Electronic Fuel Pressure Sensor, 9' Sensor Harness and more for installation. Make sure your fuel pressure is running at optimal levels and is not too low which could result in loss of horsepower and damage to your fuel pump and injectors. An average range of 60 PSI or higher is optimal for the 2017-2020 Super Duty.

GlowShift Big Line Kits for the Alumiduty 6.7L Power Stroke replace the hard fuel line between the secondary fuel filter and vapor control valve (VCV), allowing you to install a fuel pressure sensor in-line to the source. Each kit comes pre-assembled at a length of 10-1/2” with a 3/8” T-fitting and 1/8-27 NPT port for the sensor, (2) quick-connectors, (4) hose clamps and diesel rated rubber hose with a 3/8" inner diameter.

OEM black matte finish triple pillar pod that holds three 2-1/16” (52mm) gauges and completely replaces the stock A-pillar trim.

This truck-specific Super Duty gauge pod is identical in every detail including a mount so that you can continue using the factory speaker.