GlowShift's 7 Color Series Dual Gauge Package was made for the 1999-2007 Ford Super Duty Power Stroke F-250 and F-350 with either a 6.0L or 7.3L Power Stroke engine. Experience complete customization when you select from over 20 gauges for this 2-gauge set which comes with all required sensors. This package also includes your choice between a gray or tan Ford Super Duty dual pillar pod. With GlowShift’s 7 Color Gauge Series, you’ll experience the option of 7 different colors featured on an ultra-bright LED analog gauge display.
Gauge Series Details
A wide variety of unique color and style settings are available for complete customization of your ultra high-performance 2-1/16” (52mm) gauges. Choose from a black or white gauge face, and utilize 7 ultra-bright solid color display options that will allow you to match the lighting display of your Super Duty’s factory dashboard. These gauges also include microprocessor controlled stepper motor technology, selectable 7 color LED through dial lighting, a magnified tinted or clear lens depending on your selection, and an illuminated red needle that sweeps 270°. GlowShift also includes all sensors, wiring, mounting hardware and a one-year limited warranty with each purchase.
7 Color Gauge Series
- Choose from Black, White or Tinted Series
- Black or White Gauge Face
- Clear or Tinted Magnified Lens
- Ultra-Bright Analog LED Display
- Stepper Motor Technology
|
Match Your Factory Dash Lights
- 7 Color LED Through Dial Lighting
- 7 Solid Color Settings
- Blue, Red, Green, Teal, Purple, White & Yellow
- Two Color Cycle Modes
- Remembers Last Color Setting
|
Nighttime Dimming
- Dimmer Wire Dims Gauge 30%
- Reduce Brightness When Driving at Night
- Continue to Easily View your Readings
- Works When your Headlights are Turned On
- Activate with a Simple Connection
|
Diesel Tech Picks
Our Diesel Techs have years of experience and a wealth of knowledge when it comes to choosing the gauges that will work best for your Ford Super Duty. Here you’ll find their top choices based on performance, efficiency, reliability, and how effective these gauges will be in providing you with all of the information you need to get the best performance out of your truck.
60 PSI Boost
- Reads Boost from 0 - 60 PSI
- 9' of Nylon Hose
- 1/8-27 NPT Brass Compression Fittings
- Mechanically Driven
|
1500° F Pyrometer EGT
- Reads Exhaust Temperature from 0 - 1500° Fahrenheit
- 1/8-27 NPT EGT Probe with 3' of Steel Braided Cable
- 6' Sensor & 2' Power Wire Harnesses
- Waterproof EGT Probe to Sensor Harness Connector
|
Transmission Temperature
- Reads Transmission Temperature from 80 - 260° Fahrenheit
- 1/8-27 NPT Electronic Temperature Sensor
- 2' Sensor & Power Wire Harnesses
- Recommended For Vehicles with Automatic Transmission
|
100 PSI Fuel Pressure
- Reads Fuel Pressure from 0 - 100 PSI
- 1/8-27 NPT Electronic Fuel Pressure Sensor
- 9' Sensor & 2' Power Wire Harnesses
|
Pillar Pod Details
The included full size, factory matched dual pillar pod is made specifically for the 1999-2007 Ford Super Duty Power Stroke F-250 and F-350 with either a 6.0L or 7.3L Power Stroke engine. Select from gray or tan, and this pod can be effectively mounted to your existing A-pillar. This pillar gauge pod holds (2) 2-1/16” (52mm) gauges and is crafted from high quality ABS plastic, allowing it to withstand cracking, fading and warping. It can also be painted using ABS plastic paint to match your factory interior for a fully customized fit and finish.
Fits: 99, 00, 01, 02, 03, 04, 05, 06, 07 Ford Super Duty, F-250, F-350
- Holds (2) 2-1/16” (52mm) Gauges
- Choose Between Gray or Tan
- Made from ABS Plastic
- Withstands Cracking, Fading and Warping
|
- Overlay of Factory A-pillar
- Full Length Gauge Pod
- Match to Your Factory Interior
- Professional Fit and Finish
|
- Push-In Fasteners
- Color Matched to Pod
- Drill to Install
- Easy to Install Pod
|
Fitment Details
Year |
Make |
Model |
Engine |
1999 |
Ford |
Super Duty, F-250 & F-350 |
7.3L Power Stroke |
2000 |
Ford |
Super Duty, F-250 & F-350 |
7.3L Power Stroke |
2001 |
Ford |
Super Duty, F-250 & F-350 |
7.3L Power Stroke |
2002 |
Ford |
Super Duty, F-250 & F-350 |
7.3L Power Stroke |
2003 |
Ford |
Super Duty, F-250 & F-350 |
6.0L Power Stroke |
2004 |
Ford |
Super Duty, F-250 & F-350 |
6.0L Power Stroke |
2005 |
Ford |
Super Duty, F-250 & F-350 |
6.0L Power Stroke |
2006 |
Ford |
Super Duty, F-250 & F-350 |
6.0L Power Stroke |
2007 |
Ford |
Super Duty, F-250 & F-350 |
6.0L Power Stroke |
60 PSI Boost
1500° F Pyrometer EGT
Transmission Temperature
100 PSI Fuel Pressure
Select Your Gauges
Select your gauges from a variety of different gauge types below which are available for this custom 7 Color Series Gauge Package. You can also reference our Tech Picks at the beginning of this list for our top recommendations that are specific to this vehicle. With gauges made to monitor a wide range of engine applications, GlowShift is sure to have the gauge types you’re looking for as part of this custom package.
Optional Installation Accessories
Looking for an adapter that helps to simplify the install process? Or maybe you need a little more slack as you’re setting up your gauge kit. GlowShift carries a wide variety of accessories to help with the installation process for your gauge package. Choose from a diverse selection of adapters, wiring harnesses and much more that will cover everything you need and make the process even easier as you install your gauges.
1/8-27 NPT Drill & Tap Set
- Used for Installing EGT Probe, Boost Fittings or Boost Sensor
- Drill & Tap Exhaust or Intake Manifold to 1/8-27 NPT
- Includes Size R Drill Bit & 1/8 NPT Tap
|
MAP Line T-Fitting Adapter
- Quick & Easy Install of Boost Hose or Sensor into the 3/16” MAP Line
- Cut the Line, Insert the T-Fitting & Secure with Included Clamps
- Avoid Drilling & Tapping the Intake Manifold
- Female 1/8-27 NPT Thread for Fittings/Sensor
- Fits 1999-2002 Ford 7.3L Power Stroke
- Fits 2003-2007 Ford 6.0L Power Stroke
|
Air Intake Heater Boost Plug Adapter
- Quick & Easy Install of Boost Hose or Sensor to the Air Intake
- Remove the Restrictive Heater Plug & Thread Adapter in its Place
- No Drilling or Tapping Required
- Female 1/8-27 NPT Thread for Fittings/Sensor
- Fits 1999.5-2002 Ford Super Duty 7.3L Power Stroke
- Fits 2001-2004 GM 6.6L Duramax
|
Fuel Pressure Adapter for Ford 7.3L Power Stroke
- Quick & Easy Install of Fuel Pressure Sensor to Fuel Filter Housing
- No Need to Cut Factory Fuel Lines
- Replaces Pressure Port Fitting
- Features O-Ring for Leak-Free Seal
- Female 1/8-27 NPT Thread for Sensor
- Fits 1999-2002 Ford 7.3L Power Stroke
|
Fuel Pressure Adapter for Ford 6.0L Power Stroke
- Quick & Easy Install of Fuel Pressure Sensor to Fuel Filter Housing
- No Need to Cut Factory Fuel Lines
- Replaces Pressure Port Fitting
- Features O-Ring for Leak-Free Seal
- Female 1/8-27 NPT Thread for Sensor
- Fits 2003-2007 Ford 6.0L Power Stroke
|
1/2” Transmission Cooler Line T-Fitting Adapter
- Allows Installation of Temperature Sensor to the 1/2" Transmission Cooler Line
- Includes T-Fitting, Compression Nuts & Cutting Rings for Leak-Free Seal
- Female 1/8-27 NPT Thread on T-Fitting for Sensor
|
3/8” Transmission Cooler Line T-Fitting Adapter
- Allows Installation of Temperature Sensor to the 3/8” Transmission Cooler Line
- Includes T-Fitting, Compression Nuts & Cutting Rings for Leak-Free Seal
- Female 1/8-27 NPT Thread on T-Fitting for Sensor
|
HPOP Gauge Wiring Pigtail Harness
- Quick & Easy Installation Without Having to Splice or Cut into Factory Wires
- Connects Directly to Injector Control Pressure (ICP) Sensor
- Plug & Play
- Fits 1999-2002 7.3L Power Stroke
- Fits 2003-2007 6.0L Power Stroke
|
Water Temp Adapter for Ford 6.0L Power Stroke
- Quick & Easy Install of Water Temp Sensor to the Engine Block
- Remove the Block Off Plug & Thread in the Adapter
- No Major Modifications Required
- Female 1/8-27 NPT Thread for Temp Sensor
- Fits 2003-2007 Ford 6.0L Power Stroke
|
Oil Filter Sandwich Adapter
- Quick & Easy Solution to Install Multiple Sensors to the Truck’s Oil Filter
- Used for Oil Pressure & Oil Temperature Sensors
- Features a 1-1/2"-16 Thread, (4) 1/8-27 NPT Thread Ports & Port Plugs
- Includes O-Ring for Leak-Free Seal
- Fits 1994-2003 Ford Super Duty 7.3L Power Stroke
|
Expandable Circuit
- Quick & Easy Way to Power Gauges Directly from the Fuse Panel
- Used for Constant & Switched 12 Volt Power for Gauges
- Includes 4 Amp Fuse for Circuit Protection
|
2 Gauge Wiring Kit - Power Wires Only
- Conveniently Connect all Gauge Power Wires to 1 Easy-to-Use Wire Harness
- Color Matched Wires Make it Easy When Routing & Connecting Wires to their Source
- Extends the Length of Power Wires Included with Gauges
- Optional for Installation
- 6’ of Power/Ground Wires – Red, Yellow, Orange & Black Wires
- Compatible with 7 Color Gauge Series
- 20 Gauge Automotive Grade Wiring
|
2 Gauge Wiring Kit - Power & Sensor Wires
- Conveniently Connect all Gauge Power & Sensor Wires to 1 Easy-to-Use Wire Harness
- Color Matched Wires Make it Easy When Routing & Connecting Wires to their Source
- Extends the Length of Power/Sensor Wires Included with Gauges
- Optional for Installation
- 6’ of Power/Ground Wires – Red, Yellow, Orange & Black Wires
- 8’ of Sensor Wires – Blue, Brown & Green Wires
- Compatible with 7 Color Gauge Series
- 20 Gauge Automotive Grade Wiring
|
Installation Guides
This 7 Color Series Dual Gauge Package comes with an installation guide which is available online and in print and was made specifically for the 1999-2007 Ford Super Duty F-250 and F-350 with 7.3L and 6.0L Power Stroke engine. You can also visit our library of installation videos which include complete step-by-step tutorials and useful tips on how to install a wide range of GlowShift gauges and pods.
Watch the 7.3L Installation Video
|
Watch the 6.0L Installation Video
|
Download and Print the PDF
|