GlowShift's 7 Color Series Dual Gauge Package was made for the 2000-2007 Chevrolet Silverado Duramax 2500HD/3500HD, also including the 2007 Classic. Experience complete customization when you select from over 20 gauges for this 2-gauge set which comes with all required sensors. This package also includes a partial pillar mount black Chevy Silverado dual pillar pod. With GlowShift’s 7 Color Gauge Series, you’ll experience the option of 7 different colors featured on an ultra-bright LED analog gauge display.
Gauge Series Details
A wide variety of unique color and style settings are available for complete customization of your ultra high-performance 2-1/16” (52mm) gauges. Choose from a black or white gauge face, and utilize 7 ultra-bright solid color display options that will allow you to match the lighting display of your Silverado’s factory dashboard. These gauges also include microprocessor controlled stepper motor technology, selectable 7 color LED through dial lighting, a magnified tinted or clear lens depending on your selection, and an illuminated red needle that sweeps 270°. GlowShift also includes all sensors, wiring, mounting hardware and a one-year limited warranty with each purchase.
7 Color Gauge Series
- Choose from Black, White or Tinted Series
- Black or White Gauge Face
- Clear or Tinted Magnified Lens
- Ultra-Bright Analog LED Display
- Stepper Motor Technology
|
Match Your Factory Dash Lights
- 7 Color LED Through Dial Lighting
- 7 Solid Color Settings
- Blue, Red, Green, Teal, Purple, White & Yellow
- Two Color Cycle Modes
- Remembers Last Color Setting
|
Nighttime Dimming
- Dimmer Wire Dims Gauge 30%
- Reduce Brightness When Driving at Night
- Continue to Easily View your Readings
- Works When your Headlights are Turned On
- Activate with a Simple Connection
|
Diesel Tech Picks
Our Diesel Techs have years of experience and a wealth of knowledge when it comes to choosing the gauges that will work best for your Chevy Silverado Duramax. Here you’ll find their top choices based on performance, efficiency, reliability, and how effective these gauges will be in providing you with all of the information you need to get the best performance out of your truck.
60 PSI Boost
- Reads Boost from 0 - 60 PSI
- 9' of Nylon Hose
- 1/8-27 NPT Brass Compression Fittings
- Mechanically Driven
|
1500° F Pyrometer EGT
- Reads Exhaust Temperature from 0 - 1500° Fahrenheit
- 1/8-27 NPT EGT Probe with 3' of Steel Braided Cable
- 6' Sensor & 2' Power Wire Harnesses
- Waterproof EGT Probe to Sensor Harness Connector
|
Transmission Temperature
- Reads Transmission Temperature from 80 - 260° Fahrenheit
- 1/8-27 NPT Electronic Temperature Sensor
- 2' Sensor & Power Wire Harnesses
- Recommended For Vehicles with Automatic Transmission
|
30 PSI Fuel Pressure
- Reads Fuel Pressure from 0 - 30 PSI
- 1/8-27 NPT Electronic Fuel Pressure Sensor
- 9' Sensor & 2' Power Wire Harnesses
- Aftermarket Lift Pump is Required for Gauge to Work Properly
|
Pillar Pod Details
The included partial pillar mount black dual pillar pod is made specifically for the 2000-2007 Chevrolet Silverado Duramax 2500HD/3500HD, also including the 2007 Classic, and can be mounted to your existing A-pillar. This pillar gauge pod holds (2) 2-1/16” (52mm) gauges and is crafted from high quality ABS plastic, allowing it to withstand cracking, fading and warping. It can also be painted using ABS plastic paint to match your factory interior for a fully customized fit and finish.
Fits: 00, 01, 02, 03, 04, 05, 06, 07 Chevrolet Silverado 1500, 2500HD & 3500HD.
- Holds (2) 2-1/16” (52mm) Gauges
- Black Dual Pillar Pod
- Made from ABS Plastic
- Withstands Cracking, Fading and Warping
|
- Overlay of Factory A-Pillar
- 11-1/4” Partial Pillar Mount
- Match to Your Factory Interior
- Professional Fit and Finish
|
- Push-In Fasteners
- Color Matched to Pod
- Drill to Install
- Easy to Install Pod
|
Fitment Details
Year |
Make |
Model |
Engine |
2000 |
Chevrolet |
Silverado, 1500, 2500HD, 3500HD |
6.6L Duramax, LB7 |
2001 |
Chevrolet |
Silverado, 1500, 2500HD, 3500HD |
6.6L Duramax, LB7 |
2002 |
Chevrolet |
Silverado, 1500, 2500HD, 3500HD |
6.6L Duramax, LB7 |
2003 |
Chevrolet |
Silverado, 1500, 2500HD, 3500HD |
6.6L Duramax, LB7 |
2004 |
Chevrolet |
Silverado, 1500, 2500HD, 3500HD |
6.6L Duramax, LB7, LLY |
2005 |
Chevrolet |
Silverado, 1500, 2500HD, 3500HD |
6.6L Duramax, LLY |
2006 |
Chevrolet |
Silverado, 1500, 2500HD, 3500HD |
6.6L Duramax, LLY, LBZ |
2007 |
Chevrolet |
Silverado, 1500, 2500HD, 3500HD Classic |
6.6L Duramax, LBZ, LMM |
1/8-27 NPT Drill & Tap Set
- Used for Installing EGT Probe, Boost Fittings or Boost Sensor
- Drill & Tap Exhaust or Intake Manifold to 1/8-27 NPT
- Includes Size R Drill Bit & 1/8 NPT Tap
|
MAP Line T-Fitting Adapter
- Quick & Easy Install of Boost Hose or Sensor into the 3/16” MAP Line
- Cut the Line, Insert the T-Fitting & Secure with Included Clamps
- Avoid Drilling & Tapping the Intake Manifold
- Female 1/8-27 NPT Thread for Fittings/Sensor
|
Air Intake Heater Boost Plug Adapter
- Quick & Easy Install of Boost Hose or Sensor to the Air Intake
- Remove the Restrictive Heater Plug & Thread Adapter in its Place
- No Drilling or Tapping Required
- Female 1/8-27 NPT Thread for Fittings/Sensor
- Fits 2001-2004 GM 6.6L Duramax
|
Fuel Pressure Adapter for 6.6L Duramax
- Quick & Easy Install of Fuel Pressure Sensor to Fuel Filter Housing
- Aftermarket Lift Pump is Required for Fuel Pressure Gauges
- Replaces the Factory Bleeder Screw
- Features O-Ring for Leak-Free Seal
- Female 1/8-27 NPT Thread for Sensor
- Fits 2001-2017 GM Duramax 6.6L
|
Fuel Rail Adapter for Chevrolet LS Engines
- Quick & Easy Install of Fuel Pressure Sensor to Fuel Rail
- Replaces the Schrader Valve
- Includes 90° Brass Fitting to Ensure Proper Clearance
- Female 1/8-27 NPT Thread for Sensor
- Fits Any GM 5.3L/6.0L LS1, LS2, LS3, LS6 & LT1 Engines
|
Test Port Adapter for GM Allison 1000
- Quick & Easy Install of Temperature Sensor to Transmission Test Port
- Threads onto Temperature Sensor for Protection from Internal Transmission Parts
- Includes O-Ring for Leak-Free Seal
- No Modifications to Transmission Necessary
- Female 1/8-27 NPT Thread for Sensor
- Fits 2000-2018 Chevy Silverado/GMC Sierra
|
Transmission Cooler Line T-Fitting Adapter for GM Allison 1000
- Allows Installation of Temperature Sensor to the 5/8” Transmission Cooler Line
- Includes T-Fitting, Compression Nuts & Cutting Rings for Leak-Free Seal
- Female 1/8-27 NPT Thread on T-Fitting for Sensor
- Fits 2000-2019 Chevy Silverado/GMC Sierra
|
Oil Filter Sandwich Adapter
- Quick & Easy Solution to Install Multiple Sensors to the Truck’s Oil Filter
- Used for Oil Pressure & Oil Temperature Sensors
- Features a 13/16-16 Thread, (4) 1/8-27 NPT Thread Ports & Port Plugs
- Includes O-Ring for Leak-Free Seal
- Fits 2000-2013 GM 6.6L Duramax Engines
|
18ft Pressure Sensor Harness
- Extends the Length of 9’ Harness Included with Gauge to 18’
- Commonly Used on Trucks with Aftermarket Lift Pump Installed
- Plug & Play
|
Rail Pressure Pigtail Harness
- Quick & Easy Installation Without Having to Splice or Cut into Factory Wires
- Connects Directly to Common Rail Pressure Sensor
- Plug & Play
- Fits 2002-2018 Duramax LB7, LLY, LBZ, LLM & LML
|
Fuel Filter Bleeder Screw
- Upgrades the Factory Plastic Bleeder Screw to Durable Billet Aluminum
- Machined Air Channel Helps “Bleed” Air Out of the Fuel System
- Diesel Fuel Rated Viton O-Ring Provides a Leak-Free Seal
- Fits 2001-2016 6.6L Duramax LB7, LLY, LBZ, LMM & LML
|
Expandable Circuit
- Quick & Easy Way to Power Gauges Directly from the Fuse Panel
- Used for Constant & Switched 12 Volt Power for Gauges
- Includes 4 Amp Fuse for Circuit Protection
|
2 Gauge Wiring Kit - Power Wires Only
- Conveniently Connect all Gauge Power Wires to 1 Easy-to-Use Wire Harness
- Color Matched Wires Make it Easy When Routing & Connecting Wires to their Source
- Extends the Length of Power Wires Included with Gauges
- Optional for Installation
- 6’ of Power/Ground Wires – Red, Yellow, Orange & Black Wires
- Compatible with 7 Color Gauge Series
- 20 Gauge Automotive Grade Wiring
|
2 Gauge Wiring Kit - Power & Sensor Wires
- Conveniently Connect all Gauge Power & Sensor Wires to 1 Easy-to-Use Wire Harness
- Color Matched Wires Make it Easy When Routing & Connecting Wires to their Source
- Extends the Length of Power/Sensor Wires Included with Gauges
- Optional for Installation
- 6’ of Power/Ground Wires – Red, Yellow, Orange & Black Wires
- 8’ of Sensor Wires – Blue, Brown & Green Wires
- Compatible with 7 Color Gauge Series
- 20 Gauge Automotive Grade Wiring
|
60 PSI Boost
1500° F Pyrometer EGT
Transmission Temperature
30 PSI Fuel Pressure
Installation Guides
This 7 Color Series Dual Gauge Package comes with an installation guide which is available online and in print for the 2000-2007 Chevrolet Silverado Duramax 2500HD/3500HD, also including the 2007 Classic. You can also visit our library of installation videos which include complete step-by-step tutorials and useful tips on how to install a wide range of GlowShift gauges and pods.
Watch the Installation Video
|
Download and Print the PDF
|
Select Your Gauges
Select your gauges from a variety of different gauge types below which are available for this custom 7 Color Series Gauge Package. You can also reference our Tech Picks at the beginning of this list for our top recommendations that are specific to this vehicle. With gauges made to monitor a wide range of engine applications, GlowShift is sure to have the gauge types you’re looking for as part of this custom package.
Optional Installation Accessories
Looking for an adapter that helps to simplify the install process? Or maybe you need a little more slack as you’re setting up your gauge kit. GlowShift carries a wide variety of accessories to help with the installation process for your gauge package. Choose from a diverse selection of adapters, wiring harnesses and much more that will cover everything you need and make the process even easier as you install your gauges.