Build a customizable GlowShift triple gauge package for any 2002-2007 Subaru Impreza WRX STI. This package features the Elite 10 Color Gauge Series, which includes 10 different solid color options and an ultra-bright analog LED gauge display. You’ll have the choice of 3 gauges from a wide and diverse selection, with many gauges including their required sensor. As part of this gauge package you will also have the choice of either a Fiberglass, Carbon Fiber or ABS Plastic black triple gauge dashboard pod which replace the Impreza factory dashboard clock for a custom fit and finish.
Gauge Series Details
The Elite 10 Color Gauge Series includes ultra-bright LED analog gauges that feature a streamlined design with a flat gauge face, black gauge dial, magnified tinted lens and illuminated red needle. With selectable 10 color through dial lighting for the easy-to-read display, you can choose between 10 solid color options to create a custom look. The 10 solid colors include Blue, Green, Red, Yellow, White, Light Blue, Purple, Pink, Orange and Amber. Built-in stepper motor technology allows for incredibly smooth movement, resulting in extremely accurate readings. In addition to the solid color settings, you will also have (2) Color Cycle Modes which cycle through all of the solid color options. Color Fade Mode slowly navigates and fades through each of the colors. Additional features include a Color Recall capability so that your gauge will remember the last color setting used before it was turned off. Adjustable High and Low Warning functions will alert you visually or with an optional audible tone, ensuring levels are not running too high or too low. Peak Recall provides you with instant feedback on your last peak value. For even better visibility at night, there is an easy-to-use Dimming Feature which dims the gauge 30% for clearer viewing.
Elite 10 Color Series
- Black Gauge Dial
- Tinted Magnified Lens
- 7/8” Depth for Lens
- Illuminated Red Needle
|
Customizable Color Display
- Ultra-Bright LED Lighting
- 10 Solid Color Settings
- Blue, Green, Red, Yellow, White, Light Blue, Purple, Pink, Orange and Amber
- Color Cycle & Color Fade Modes
|
Nighttime Dimming
- Dimmer Wire Dims Gauge 30%
- Reduce Brightness When Driving at Night
- Works When your Headlights are Turned On
- Activate with a Simple Connection
|
High and Low Warning Function
- High and Low Readouts
- Set Your Preferred Levels
- Audible Tone or Visual Alert
- Easy to Program
|
Peak Recall Ability
- Peak Setting Mode
- Recalls Last Peak Value
- Quick Intuitive Feedback
- Optional Feature
|
Wiring for Installation
- 2’ Power Harness with Each Gauge
- Plug ‘n Play Connectors
- Gauges Daisy-Chain Together
- Power All Gauges Thru 1
|
Tech Picks
Our Techs have years of experience and a wealth of knowledge when it comes to choosing the gauges that will work best for your 02-07 Subaru Impreza WRX. Here you’ll find their top choices based on performance, efficiency, reliability, and how effective these gauges will be in providing you with all of the information you need to get the best performance out of your engine.
30 PSI Boost/Vacuum
- Reads Boost from 0 - 30 PSI
- Reads Vacuum from (-30) - 0 inHG
- Electronic Sensor, 6' Clear PVC Hose, T-Fitting & Filter
- 2' Power & 6' Sensor Wire Harnesses
|
Oil Pressure
- Reads Oil Pressure from 0 - 100 PSI
- 1/8-27 NPT Electronic Pressure Sensor
- 2' Power & 6' Sensor Wire Harnesses
|
100 PSI Fuel Pressure
- Reads Fuel Pressure from 0 - 100 PSI
- 1/8-27 NPT Electronic Pressure Sensor
- 2' Power & 6' Sensor Wire Harnesses
|
Wideband Air/Fuel Ratio
- Reads Air/Fuel Ratio from 10 - 20 AFR
- Analog Needle
- Wideband Oxygen Sensor
- Digital Wideband Controller Unit with Data Logging
- Weld-In Sensor Bung
- Power & Sensor Wire Harnesses
|
Pod Details
The included triple dashboard gauge pod is made specifically for the 2002-2007 Subaru Impreza WRX STI. This black dash pod is offered in 3 different styles as either an ABS plastic pod, a fiberglass pod with a lip, or as a carbon fiber pod with a lip. Each pod replaces the factory dashboard clock and seamlessly mounts to your 2002-2007 Subaru Impreza WRX STI with the included mounting hardware. This pod also securely holds (3) 2-1/16” (52mm) gauges that monitor a range of engine systems.
Fits: 02, 03, 04, 05, 06, 07 Subaru Impreza WRX STI.
- Holds (3) 2-1/16” (52mm) Gauges
- Black Dashboard Pod
- ABS Plastic, Fiberglass or Carbon Fiber
- Replaces the Factory Dash Clock
|
- Tailor-Made for the Impreza
- Mount to Your Impreza’s Dash
- Easy Installation
- Custom Measured
|
- Custom Molded Mounting Plate
- Fiberglass & Carbon Fiber Pods Install With Adhesive Strips
- ABS Plastic Pod Includes Mounting Hardware
- Easy Installation Process
|
Fitment Details
Year |
Make |
Model |
Engine |
2002 |
Subaru |
Impreza, WRX, STI |
EJ20, EJ25 |
2003 |
Subaru |
Impreza, WRX, STI |
EJ20, EJ25 |
2004 |
Subaru |
Impreza, WRX, STI |
EJ20, EJ25 |
2005 |
Subaru |
Impreza, WRX, STI |
EJ20, EJ25 |
2006 |
Subaru |
Impreza, WRX, STI |
EJ20, EJ25 |
2007 |
Subaru |
Impreza, WRX, STI |
EJ20, EJ25 |
8mm Fuel Line T-Fitting Adapter
- Quick & Easy Install of Pressure Sensor to 8mm Fuel Line
- Cut the Line, Insert the T-Fitting & Secure with Included Clamps
- Barbed Fittings for Leak-Free Connection
- Female 1/8-27 NPT Thread for Sensor
- Fits 2002-2012 Subaru Impreza WRX
|
Oil Galley Adapter for Subaru EJ Engines
- Quick & Easy Install of Pressure or Temperature Sensor to Oil Galley Port on Engine
- Includes Crush Washer for Secure Fit
- Wrapped with Teflon Tape for Leak-Free Seal
- Female 1/8-27 NPT Thread for Sensor
- Fits Subaru EJ Engines
|
Oil Filter Sandwich Adapter
- Quick & Easy Solution to Install Multiple Sensors to Vehicle’s Oil Filter
- Used for Oil Pressure & Oil Temperature Sensors
- Features (4) 1/8-27 NPT Thread Ports & Port Plugs
- Includes O-Ring for Leak-Free Seal
|
Add-On Clock Power Wiring Harness
- Used to Power All 3 Gauges from 1 Easy-to-Use Harness
- Quick & Easy Installation Without Having to Splice or Cut into Factory Wires
- 4-Pin Connector Plugs Directly Into Factory Clock Connector
- Yellow, Black, Orange & Red Wires with Butt-Connectors
- Fits 2002-2005 Subaru Impreza WRX
|
30 PSI Boost/Vacuum
Oil Pressure
100 PSI Fuel Pressure
Wideband Air/Fuel Ratio
Installation Guides
This Elite 10 Color Series Triple Dashboard Gauge Package comes with product instructions that provide complete details on how to install your gauges and pod for the 2002-2007 Subaru Impreza WRX STI. You can also visit our library of installation videos which include complete step-by-step tutorials and useful tips on how to install a wide range of GlowShift gauges and pods.
Watch the Installation Video
|
Select Your Gauges
Select your gauges from a variety of different gauge types below which are available for this custom Elite 10 Color Gauge Series Package. You can also reference our Tech Picks at the beginning of this list for our top recommendations that are specific to this vehicle. With gauges made to monitor a wide range of engine applications, GlowShift is sure to have the gauge types you’re looking for to create a customized package.
- Reads Boost from 0 - 30 PSI
- Reads Vacuum from (-30) - 0 inHG
- Electronic Sensor, 6' Clear PVC Hose, T-Fitting & Filter
- 2' Power & 6' Sensor Wire Harnesses
- Reads Boost from 0 - 60 PSI
- 1/8-27 NPT Electronic Pressure Sensor
- 2' Power & 9' Sensor Wire Harness
- Reads Exhaust Temperature from 0 - 1500° Fahrenheit
- 1/8-27 NPT EGT Probe with 3' of Steel Braided Cable
- 2' Power & 6' Sensor Wire Harnesses
2200° F Exhaust Gas Temperature
- Reads Exhaust Temperature from 200 - 2200° Fahrenheit
- 1/8-27 NPT EGT Probe with 3' of Steel Braided Cable
- 2' Power & 6' Sensor Wire Harnesses
- Reads Transmission Temperature from 80 - 260° Fahrenheit
- 1/8-27 NPT Electronic Temperature Sensor
- 2' Power & 8' Sensor Wire Harnesses
- Recommended For Vehicles with Automatic Transmission
Water (Coolant) Temperature
- Reads Coolant Temperature from 100 - 280° Fahrenheit
- 1/8-27 NPT Electronic Temperature Sensor
- 2' Power & 8' Sensor Wire Harnesses
- Reads Oil Temperature from 100 - 280° Fahrenheit
- 1/8-27 NPT Electronic Temperature Sensor
- 2' Power & 8' Sensor Wire Harnesses
- Reads Fuel Pressure from 0 - 30 PSI
- 1/8-27 NPT Electronic Pressure Sensor
- 2' Power & 9' Sensor Wire Harnesses
- Reads Fuel Pressure from 0 - 100 PSI
- 1/8-27 NPT Electronic Pressure Sensor
- 2' Power & 9' Sensor Wire Harnesses
- Reads Oil Pressure from 0 - 100 PSI
- 1/8-27 NPT Electronic Pressure Sensor
- 2' Power & 9' Sensor Wire Harnesses
- Reads NOS Pressure from 0 - 1,600 PSI
- 1/8-27 NPT Electronic Pressure Sensor
- 2' Power & 9' Sensor Wire Harnesses
- Reads Vehicle Electrical System Voltages from 8 - 18 DC Volts
- 1' Power Wire Harness
- Reads Vacuum from (-30) - 0 inHG
- Electronic Sensor, 6' Clear PVC Hose, T-Fitting & Filter
- 2' Power & 6' Sensor Wire Harnesses
Narrowband Air/Fuel Ratio
- Reads & Indicates Lean, Rich & Optimal AFR
- 2' Power & 6' Sensor Wire Harness
- Reads Air/Fuel Ratio from 10 - 20 AFR
- Analog Needle
- Wideband Oxygen Sensor
- Digital Wideband Controller Unit with Data Logging
- Weld-In Sensor Bung
- Power & Sensor Wire Harnesses
- Reads Vehicle’s RPM from 0 - 10,000
- 1 - 10 Cylinder Setting Switch on Back of Gauge
- 2' Power Wire Harness
- Reads Fuel Level from Empty, ¼, ½, ¾ & Full
- 2' Power & 6' Sensor Wire Harnesses
Optional Installation Accessories
Looking for an adapter that helps to simplify the install process? Or maybe you need a little more slack as you’re setting up your gauge kit. GlowShift carries a wide variety of accessories to help with the installation process for your gauge package. Choose from a diverse selection of adapters, wiring harnesses and much more that will cover everything you need and make the process even easier as you install your gauges.