Tinted 7 Color 3-3/8" 8,000 RPM In-Dash Tachometer Gauge

GlowShift Tinted 7 Color Series 3-3/8" (85mm) 8,000 RPM In Dash Tachometers read from 0 to 8,000 RPM with pinpoint precision on an ultra-bright analog LED display. This tach RPM gauge is optimal for any driver building a custom dashboard or replacing the stock tachometer of a 1 through 10 cylinder gas powered vehicle. Time your shift perfectly and protect against unnecessary transmission wear at the same time.

GlowShift Tinted 7 Color Series Gauges come standard with a cutting-edge design that includes a black dial, analog display, low profile tinted lens, and illuminated red needle equipped with stepper motor technology for incredibly accurate readings. On or off, these gauges will look incredible courtesy of the stealth-like tinted lens feature. Choose between 7 color options for ultra-bright LED readouts. You can also Activate Nighttime Dimming Mode for optimal viewing after sundown.

Features The illuminated red needle sweeps 270° and is powered by stepper motor technology, giving you an effective combination of incredibly precise gauge readings and extremely smooth needle movement. GlowShift’s 7 Color through dial lighting system gives you the ability to select and change the color of the lighting display by simply pressing the button located on the front.

7 Color Options Easily cycle through 7 Solid Color Modes including Blue, Green, Red, Teal, Yellow, Purple and White, along with 2 Color Cycles. Adjust the color of the display to match your factory dash lights, or create a custom look inside of your car or truck. With Color Recall, you won’t have to reset the color of the gauge every time you turn on your vehicle.

Backlighting This gauge features LED backlighting which results in an ultra-bright display that delivers clear and vivid readouts. By connecting the orange wire from the power harness to the factory headlight switch, you’ll be able to dim the gauge 30% when the headlights are on. This setting will help you to reduce brightness and glare while viewing readings at night.

Wiring The 2’ Power Harness utilizes Plug and Play Connectivity to easily snap into the modular connector on the back of the gauge. Wires are included for Power, Ground and a Dimming feature. The 6’ Signal Wire attaches directly to the RPM Tachometer Signal.

In-Dash Mount The included 3-3/8" In Dash Mounting Bracket will securely mount the 3-3/8" In Dash Tachometer into your car or truck's dashboard. Hardware is also included for the installation process.

HEI Tach Signal Filter GlowShift Tach RPM Gauges are only designed for a gasoline, single coil application. For multiple coil applications, the use of a multiple coil or aftermarket ignition system adapter is required. Vehicles equipped with High Energy Ignition Systems (HEI) will require our HEI Signal Filter.