White 7 Color 100 PSI Boost Gauge

GlowShift White 7 Color Series 100 PSI Boost Gauges are essential to the serious diesel truck owner who knows that 60 pounds of boost just isn’t enough. This 2-1/16” (52mm) high-performance diesel gauge reads boost pressure from 0 to 100 PSI and is a great resource for monitoring where vacuum compression levels are not necessary. Take readings with a turbo boost gauge which also ensures that your turbo is performing at optimal levels and does not overboost causing critical engine damage.

White 7 Color Series Gauges come standard with a cutting-edge design that includes a white gauge dial, analog display, clear flat lens and illuminated red needle. Choose between 7 color options for the LED display featuring a through dial lighting system. Install to the dashboard, A-pillar, or another location in your car or truck to enhance the inside of your vehicle and take reliable readings.

Features The illuminated red needle sweeps 270° and is powered by stepper motor technology for an effective combination of incredibly precise readings and extremely smooth needle movement. Select and change the color of your gauge lighting display by pressing the button located on the front of the gauge.

7 Color Options The featured Solid Color Modes are Blue, Green, Red, Teal, Yellow, Purple and White. Match the factory dash lights or create a custom look. 2 Color Cycle Modes scroll through all of the available solid colors. With Color Recall you won’t have to reset the color every time you turn on your vehicle.

Backlighting This gauge features LED backlighting which results in an ultra-bright display that delivers clear and vivid readouts. Activate Nighttime Dimming Mode to reduce the brightness for easier viewing of readings at night. The analog display and needle will dim 30% anytime the headlights are on.

What's Included

Hose & Fittings This mechanical boost gauge kit comes with everything required for your boost gauge install. You’ll receive 9’ of Boost Hose and Ferrule Fittings, allowing you to drill and tap your intake manifold for extremely accurate gauge readings.

Wiring The included 2’ Power Harness is attached to the back of the gauge. Wires are included for Power, Ground, and a Dimming feature. The extended wire length also provides added flexibility during installation.

Mounting Bracket A Mounting Bracket is included with hardware which attaches the bracket to the back of the gauge for a secure fit in any vehicle’s in-dash mount. The bracket is U-shaped and made out of metal to be extremely durable.